4/14/16

Today in class I continued on my big project.

4/12/16

Today in class I continued on my big project.

4/8/2016

Today I also started my next shadow box.  This one has a picture as the center and the extension of the scene as the shadow box.

4/8/2016

Today in class I was able to laser cut my third shadow box.  its a tree with a frame around it that fits to the shape of the tree.  This one will also be the deepest one that I have done.  I will get it assembled soon.

4/6/2016

Today in class I also did a fish eye perspective drawing.  It has two squares over lapping and an L shaped cube.

4/6/2016

Today in class I finished my one point my two point and my three point lighting.  Here is what they look like.

4/4/2016

Today in class I finished my idea for a tree.  It is a form fitting outline that shrinks and it goes to the center.  The back layer with the tree will be a piece of printer paper laser cut on a piece of glass.  It should burn the edges of the tree into the glass which will keep it sturdy and provide a good backing.  It will also be good to let light through.  Since it won't be free standing I will make it so it hangs.

3/14/2016

Today in class I laser cut my second shadow box.  This one is a circle with a spiral of triangles going back.  It has a unique pattern that is hypnotic and really cool.  I can't wait to lights in this one. 

3/11/2016

Here is another version of a shadow box I can do.  It it 7 in. tall and 9 in. wide.  This is a cave with four smaller caves at the sides and it has two howling wolfs in the center howling at a moon.

3/10/2016

Today in class I came up with even more good ideas for mountains. 

3/9/2016

Today I made my octopus and background.  It is a blue octopus with a green background.  In the background there is a spiral around the octopus and also a bunch of cool little stars. 

3/8/2016

Today in class I finally got to laser cut.  I got all eight layers and the border cut.  Now I have to assemble them and get the lights put in behind the last layer and add a battery and a switch.  Then I have to make the outside look very clean.  Then this one will be done and I can move onto the mountains.

Design brief

My final project will be an assortment of different shadow boxes that I will cut in Photoshop touch up in Illustrator and then cut out on the laser cutter.  I want to do one of a cave, one of the mountains, and one of a forest.  The cave will be cut using a real photo that I have taken.  The mountains will be one that will not have a defined picture.  The forest will take a variety of different photos that I have taken and put them together to make it seem like a forest.  It will be a night scene so there will be a moon it the background surrounded by a bunch of stars.  Each one will be finished the same way with the cave and mountain being finished with cool white lights and the wolf and moon being finished with RGB lights.  I want to do this because it is a different way to show off a picture.  Also in architecture the laser cutter is becoming a more popular way to convey one's thoughts and this will help if I become an architect.

• Can be no bigger then 12 by 24
• It needs to look crisp.
• Some materials are foam core, poster board, Led lights. 
• I need to know how to use Photoshop Illustrator and the laser cutter

3/4/2016

Today in class I had to redo my project because the size was too big.  I didn't check the size of the laizer cutter so it was too big.  I redid it all and its good to go.

3/2/2016

Today in class I worked hard on my final project.  I got the photo cut in Photo shop and was able to import it into illustrator to prep for the laser cutter.  Next class I am hoping to have the teacher check me and get started laser cutting.  This is something that I really want to do.  By the time this project is done it will be about 6 inches thick.

2/29/2016

Today in class I worked on my big project some more and figured out which direction I need to go.

2/25/2016

Today in class I finished my robot and cut my picture apart for my shadow light box.  There is eight different sections in the photo that will be cut out.

2/23/2016

Today in class I made a robot in illustrator.

Idea number one

This picture would be great to use for a  shadow box.  It has a lot of depth and would look really great.

Thoughts and Ideas

Here are some thoughts and ideals I had for a shadow box picture.

Virtual cork board

 

Here is some thoughts I have for a Shadow box.  I would like three or four of these as my final project.  I will need to learn the laser cutter to be able to do this.

Skill objective

I would really like to learn how to splice a picture in Photoshop to have it cut out by the laser cutter.  I think that this would be really cool and a different way to preserve a picture.  I need to learn how to use the laser cutter to do this.  Maybe I need to start out with some smaller projects.

2/5/2016

Today in class we worked on our levitation project.

Design Objective

My design objective for this semester is to take different photos of different objects in different settings.  I want to become a better photographer.

2/3/2016

Today I continued to work on my tsa project.  I kept redoing the graphic representation till I loved it.

2/1/2016

Today in class I worked on my TSA early submission paperwork.

1/28/16

Today in class I continued on my zebra rhino.  So I did the head and I also did the tail.

10 things that I can do in this class

Ten things that I can do in this class to get to my big goal.

• Take photos.
• Learn how to edit photos to make them better.
• Learn how to use the camera better.
• Take different types of photos.
• Learn about different types of cameras.
• Take photos of different subjects.
• Ask people how to become better.
• Start taking my camera everywhere.
• Maybe join Yearbook.
• Be better.

1/26/2016

Today I continued working on combining a zebra and a rhino.

1/22/2016

Today I worked on my TSA photos and started on combining a zebra and a rhino.

1/20/2016

Today we learned about the selection tool in photo shop.  We took a picture of the statue of liberty and took out the blue around it.

1/15/2016

Today I finished my Photoshop picture.  I took out the light poles in the background.  I also took out the car behind the guy.

Big Goal

Something that I am very into is photography.  Me and my family have always been very into photography.  Photography is a great way to capture things that are going on around you. 

1/13/2016

This will be the blog that I use in my 2-D digital arts class.